 |
|
Grape and Fruit Presses, Crushers and Crusher/Destemmers
*Please note that due to size and weight several of our presses
and crushers will be shipped via common carrier truck or FedEx
Ground Hundredweight Service almost exclusively. We will contact
you with the exact shipping charges before processing your
order. Thank You for your cooperation.
** Please note that at harvest time it is not unusual for
the Wine Making Superstore and our suppliers inventory of
presses and crushers to be depleted. BE SAFE ORDER EARLY (
Early summer is best). |
|
| Presses |
|
 |
FRUIT
PRESSES
Unlike tabletop & fruit presses that use a moving screw
& plate, these presses use a stationary threaded shaft
with a ratcheting head to do the pressing with a greater amount
of torque & capacity. Select a press that will meet your
pressing requirements. Generally, 2 cases of grapes will yield
6 gallons of wine. Each case of grapes weighs approximately
36 pounds. The #30 press will readily accommodate two cases
of grapes at one pressing.
Wine
Press includes:
A pressed steel base with threaded shaft & drain pan.
Split wood basket with metal bands, hinges & pins.
Wood pressing plate & wood blocking.
Ratcheting head with metal knives or keys.
**ADDITIONAL
SHIPPING CHARGES MAY APPLY** |
 |
|
| WM5517 |
FRUIT
PRESS #25 RATCHET STYLE
(10" X 14", 50 POUND CAPACITY) |
$379.95
$339.99 |
|
| WM5512 |
FRUIT
PRESS #30 RATCHET STYLE
(12" X 16", 80 POUND CAPACITY) |
$425.95
$385.99 |
|
| WM5513 |
FRUIT
PRESS #35 RATCHET STYLE
(14" X 18", 100 POUND CAPACITY) |
$455.95
$415.99 |
|
| WM5514 |
FRUIT
PRESS #40 RATCHET STYLE
(16" X 22", 150 POUND CAPACITY) |
$495.95
$455.99 |
|
| WM5515 |
FRUIT
PRESS #45 RATCHET STYLE
(18" X 24", 200 POUND CAPACITY)
SPECIAL ORDER |
$610.95
$570.99 |
|
|
|
#20
STAINLESS STEEL FRUIT PRESS W/STAND
45
x 45 x 70 cm stainless steel basket holds 9.5 liters.
|
 |
|
| WM8061
SOLD OUT |
#20
STAINLESS STEEL FRUIT PRESS W/STAND
|
$305.95
$275.99 |
|
|
CRUSHERS
Crusher-destemmers
are used for bulk processing of grapes during harvest
in preparation for pressing or primary fermentation.
The crushers utilize a set of aluminum rollers that
crush & break the skins to release the juice &
allow the breakdown of the remaining pulp. A screw feeder
moves the grapes to the rollers to begin crushing, dropping
the skins & pulp onto a perforated grid, while a
shaft with paddles causes the stems to be separated
from the grape clusters which are then expelled to the
side of the crusher. The rollers should be adjusted
to properly crush & break the skins while avoiding
bruising or abrading the skins which would release phenols
& excess tannin, thus adding astringency to the
must & the final product. White grapes are crushed
before pressing, while red grapes are crushed for immediate
fermentation to maximize yield of tannins & flavors,
then pressed after the skins & pulp are broken down
by the fermentation process.
**ADDITIONAL
SHIPPING CHARGES MAY APPLY**
|
|
|
MANUAL
GRAPE CRUSHER - PAINTED
Painted
steel hopper is 500 x 750 mm with paddle style auger. Stand
sold seperately.
|
 |
|
| WM8053 |
MANUAL
GRAPE CRUSHER - PAINTED
(PAINTED STEEL HOPPER 500X750MM)
|
$275.95
$255.99 |
|
|
|
MANUAL
CRUSHER/DE-STEMMER - PAINTED
Painted
steel hopper is 500 x 900 mm with paddle style auger. Stand
sold seperately.
|
 |
|
| WM8054 |
MANUAL
CRUSHER/DE-STEMMER
PAINTED
(PAINTED STEEL HOPPER 500X900MM) |
$465.95
$425.99 |
|
|
|
|
MOTORIZED
CRUSHER/DE-STEMMER - PAINTED
Painted
steel hopper is 500 x 950 mm with worm style auger. Motor
size is 1 horsepower & has 1500 kg/hr production rate.
Stand sold seperately.
|
 |
|
| WM8056 |
MOTORIZED
CRUSHER/DE-STEMMER
PAINTED
(PAINTED STEEL HOPPER 500X950MM) |
$815.95
$789.99 |
|
|
|
|
PAINTED
STAND FOR CRUSHER/DE-STEMMER
Approximate
Dimensions
32.5"
L x 13.5" W x 29" H
|
 |
|
| WM8058
|
PAINTED
STAND FOR
CRUSHER/DE-STEMMER
|
$209.95
$189.99 |
|
|
|
|
ALL
STAINLESS STEEL MOTORIZED CRUSHER/DE-STEMMER
Stainless steel hopper is 500 x 950 mm with worm style auger.
Motor size is 1 horsepower & has 1500 kg/hr production
rate. Stand sold seperately.
|
 |
|
| WM8062 |
ALL
STAINLESS STEEL MOTORIZED CRUSHER/DE-STEMMER
(STAINLESS STEEL HOPPER 500X950MM) |
$1498.95
$1449.99 |
|
|
|
